Live lessons, all chapters
One idea per screen, with a check every few steps. Your answers are saved in this browser, so you can stop and come back.
2SDOF Forced Vibration
- Week 5, 12 steps, 9 checks, not startedHarmonic force: amplitude and phaseA vibratory parts feeder driven at 50 Hz — magnification factor and phase lag (handbook §2.1–§2.2)
- Week 6, 9 steps, 6 checks, not startedA spinning off-centre massThe rumble motor in a game controller — rotating imbalance, a force that grows with speed, and an amplitude that does not (handbook §2.3)
- Week 6, 8 steps, 6 checks, not startedWhen the floor does the shakingA museum display case of glassware on a floor shaken by passing lorries — base motion and displacement transmissibility (handbook §2.4)
- Week 7, 7 steps, 4 checks, not startedHow much of each stride the shoe passes onA running-shoe test rig: the frequency response function, the resonance peak and force transmissibility, read off one curve (handbook §2.5)
Videos for this chapter (7)
0 of 7 watched
Progress stays in this browser. Sign in with your UiTM account to record it for your lecturer.
Part 1: A harmonic force, resonance and beating
Part 2: Damping, magnification and phase
Part 3: Rotating imbalance
Part 4: Base motion, and three ratios that look alike
Part 5: Transmissibility and isolation
Part 6: Designing an isolating mount
Part 7: Beliefs, traps and takeaways
3Two-Degree-of-Freedom Coupled Vibration
- Week 6, 7 steps, 4 checks, not startedTwo masses, two equationsA laptop on a cushioned lap desk: degrees of freedom, free-body diagrams and the mass and stiffness matrices (handbook §3.1–§3.2)
- Week 7, 8 steps, 5 checks, not startedThe two ways it likes to moveThe laptop and lap desk again: natural frequencies, mode shapes and the normal-mode solution (handbook §3.3–§3.4)
- Week 7, 8 steps, 5 checks, not startedA small mass that cancels a big buzzA tennis-racket string dampener: forced vibration of a two-DOF system and the vibration-absorber idea (handbook §3.5)
Videos for this chapter (7)
0 of 7 watched
Progress stays in this browser. Sign in with your UiTM account to record it for your lecturer.
Part 1: From one coordinate to two
Part 2: From free bodies to matrices
Part 3: Why the determinant vanishes
Part 4: Mode shapes and orthogonality
Part 5: One push, two modes
Part 6: The vibration absorber
Part 7: Misreadings and traps
4Frequency Response and Analysis Techniques
- Week 12, 8 steps, 5 checks, not startedHearing the harmonicsA plucked guitar string: from the time signal to the spectrum, and what the frequency response function adds (handbook §4.1–§4.2)
- Week 13, 8 steps, 5 checks, not startedYour phone as a vibration labMeasuring your own walk with a phone accelerometer: the sampling rate, an alias, leakage and the window, and a short script (handbook §4.2–§4.3, §5.4)
- Week 14, 8 steps, 5 checks, not startedListening for a failing bearingAn e-scooter wheel bearing: defect frequencies, a severity check against ISO 10816, and what to tell the owner (handbook §4.3–§4.5)
5Fundamental Frequency Estimation Methods
Videos for this chapter (6)
0 of 6 watched
Progress stays in this browser. Sign in with your UiTM account to record it for your lecturer.
Part 1: Why approximate, and flexibility
Part 2: Building the flexibility matrix
Part 3: Dunkerley's formula
Part 4: Rayleigh's method
Part 5: Both bounds, and a decision
Part 6: Traps, and what to take away