CoursesMEC521 Vibrations

Chapter

Chapter 4: Frequency Response and Analysis Techniques

Weeks 12–14. Covers AIMS topics 3.5 and 5.3, with measurement and diagnostics

What is covered

Week 12 14 Dec to 20 Dec 2026

  • Introduction to the frequency response function
  • Time domain to frequency domain

Week 13 28 Dec to 3 Jan 2027

  • Measurement techniques: sensors, data acquisition, signal processing
  • Vibration analysis using modern programming tools

Week 14 4 Jan to 10 Jan 2027

  • Vibration-based diagnostics
  • Condition monitoring protocols (ISO 10816, API 670)
  • Revision

Try it

Cheat sheet

The FRF is Chapter 2's amplitude and phase as one complex number (F4.1.1): stiffness sets the response below resonance, mass above it, damping only near ω_n . The animation runs a whole modal test.One page for Chapter 4The key picture, which formula to use when, and the ways to lose marksOpen the Chapter 4 cheat sheet

Animations

Show the 8 animations from the lecture slides
Watch a recipe being mixed: 3, 7, 12 Hz mixed one at a time; spectrum bars grow
Watch a recipe being mixed. 3, 7, 12 Hz mixed one at a time; spectrum bars grow.
Watch the test rhythm sweep: the FFT as multiply-and-average with a test rhythm
Watch the test rhythm sweep. The FFT as multiply-and-average with a test rhythm.
Watch the two peaks come apart: 40 + 41 Hz, record 0.25 → 3 s; separate for good from 2.30 s
Watch the two peaks come apart. 40 + 41 Hz, record 0.25 → 3 s; separate for good from 2.30 s.
Watch the fan lie: a fan filmed at 24 frames/s; apparent speed sawtooth
Watch the fan lie. A fan filmed at 24 frames/s; apparent speed sawtooth.
Watch a tone leak: tone sliding between lines; no window vs Hann, in dB
Watch a tone leak. Tone sliding between lines; no window vs Hann, in dB.
Watch the FRF build up: 30 noisy taps: H1 converging, coherence dipping at the anti-resonance
Watch the FRF build up. 30 noisy taps: H1 converging, coherence dipping at the anti-resonance.
Watch three modes at once: cantilever modes 1–3 with their nodes
Watch three modes at once. Cantilever modes 1–3 with their nodes.
The whole test in one animation: one structure with the F-80's first 3 modes through all 7 stages: tap, record, window, FFT, divide, average, read modes (hand-picked vs LMS)
The whole test in one animation. One structure with the F-80's first 3 modes through all 7 stages: tap, record, window, FFT, divide, average, read modes (hand-picked vs LMS).

Download