MEC521 · Week 5 · Harmonic force: amplitude and phase
A vibratory parts feeder driven at 50 Hz — magnification factor and phase lag (handbook §2.1–§2.2)
The machineUndamped steady stateDamping and phaseBack on the machineWrap-up
Watch first: the video for this lesson

Progress stays in this browser. Sign in with your UiTM account to record it for your lecturer.

Part 2: Damping, magnification and phase

Not startedOpen the video on its own

heavy bench (fixed)basehopperscrews walk to the robotx(t)input: the drive forceF0 = 60 N, f = 50 Hzoutput: the trough, x(t)trough, m = 4 kgleaf springs, k = 490 kN/mdamping, c = 112 N·s/mbase bolted down: it does not move
swipe the diagram sideways ↔
Step 1 of 12 · The machine

A trough that walks screws to a robot

On an assembly line, small screws reach the robot along a vibratory feeder: a steel trough on inclined leaf springs, shaken by an electromagnetic drive underneath. Every shake tosses the screws a little way along the trough.

The drive pushes and pulls on the trough with a force of amplitude 60 N at 50 Hz. The trough and its fittings have m = 4 kg; the leaf springs give k = 490 kN/m.

Today's question: how far does the trough swing, and does it move in step with the drive or lag behind it? Too little swing and the screws stop; too much and they jump and tangle.