CoursesMEC524 Control SystemsLive lessons

Live lessons, all chapters

One idea per screen, with a check every few steps. Your answers are saved in this browser, so you can stop and come back.

2System Model Representation

  1. Week 5, 16 steps, 11 checks, not startedOne table, two methodsBlock-diagram reduction and Mason's gain formula on a rotary indexing table

3Mathematical Modelling of Engineering Systems

  1. Week 6, 12 steps, 8 checks, not startedFree-body diagram to transfer functionNewton's method on an isolation table, then on a self-closing gate
  2. Week 6, 10 steps, 7 checks, not startedTwo meshes, one shared branchKirchhoff's voltage law on a supercapacitor ride-through for a PLC
  3. Week 7, 9 steps, 6 checks, not startedA motor, a gearbox and a doorDC motor modelling with reflected inertia on a roller-door drive
  4. Week 7, 9 steps, 6 checks, not startedTwo tanks that talk backConservation of mass on a two-compartment settling tank
  5. Week 7, 12 steps, 8 checks, not startedEnergy instead of forcesThe Lagrange method on a rowing machine: one coordinate, no cord tension
  6. Week 7, 8 steps, 6 checks, not startedOne door, every Test 1 skillA fire door with a closer and a motorised opener: model, transfer function, step response, feedback and state space
Videos for this chapter (10)

0 of 10 watched

Progress stays in this browser. Sign in with your UiTM account to record it for your lecturer.

Part 1: Why build a model

Not startedOpen on YouTube

Part 2: Newton's method: two masses on one mount

Not startedOpen on YouTube

Part 3: A driven cart and a pivoted bar

Not startedOpen on YouTube

Part 4: The series RLC circuit

Not startedOpen on YouTube

Part 5: The DC motor

Not startedOpen on YouTube

Part 6: Gears and reflected inertia

Not startedOpen on YouTube

Part 7: BLDC hover (optional)

Not startedOpen on YouTube

Part 8: Tanks and heat

Not startedOpen on YouTube

Part 9: The energy method and rolling

Not startedOpen on YouTube

Part 10: Traps and takeaways

Not startedOpen on YouTube

4System Performance Analysis

  1. Week 10, 9 steps, 6 checks, not startedFirst order, then second orderA phone camera’s voice-coil autofocus: the coil current settles, then the lens rings on its flexure
  2. Week 11, 9 steps, 5 checks, not startedKeeping up with a turnA robot lawn mower holding its heading: steady-state error, system type and the Routh limit on the gain
  3. Week 12, 9 steps, 5 checks, not startedWhere the poles go as you turn the knobA magnetic levitating desk globe: an unstable plant, its root locus, and why a zero is needed
Videos for this chapter (9)

0 of 9 watched

Progress stays in this browser. Sign in with your UiTM account to record it for your lecturer.

Part 1: What a response tells you

Not startedOpen the video on its own

Part 2: First order: one store, one exponential

Not startedOpen the video on its own

Part 3: Second order: radius and angle

Not startedOpen the video on its own

Part 4: From the poles to the specifications

Not startedOpen the video on its own

Part 5: Worked examples, and when the formulas lie

Not startedOpen the video on its own

Part 6: Steady-state error and system type

Not startedOpen the video on its own

Part 7: Stability and the Routh array

Not startedOpen the video on its own

Part 8: Root locus: the conditions and the rules

Not startedOpen the video on its own

Part 9: Designing with the root locus

Not startedOpen the video on its own

5Frequency Response Analysis

  1. Week 13, 8 steps, 4 checks, not startedShake it at every frequencyA geophone that records ground motion: its Bode plot, read asymptote by asymptote, and the margins of a loop around it
  2. Week 14, 7 steps, 4 checks, not startedA delay you cannot see on the plotA telepresence robot steered over Wi-Fi: the Nyquist plot, the encirclement count, and how much delay the loop survives
Videos for this chapter (9)

0 of 9 watched

Progress stays in this browser. Sign in with your UiTM account to record it for your lecturer.

Part 1: What frequency response is

Not startedOpen the video on its own

Part 2: Magnitude, phase and decibels

Not startedOpen the video on its own

Part 3: Standard form and the four factors

Not startedOpen the video on its own

Part 4: Sketching a Bode plot

Not startedOpen the video on its own

Part 5: Gain margin and phase margin

Not startedOpen the video on its own

Part 6: Phase margin, damping and the gain knob

Not startedOpen the video on its own

Part 7: The Nyquist plot and Z = N + P

Not startedOpen the video on its own

Part 8: When the open loop is unstable

Not startedOpen the video on its own

Part 9: Margins on the Nyquist plane

Not startedOpen the video on its own