MEC521 Mini Project 202642 -- Group 11 dataset
================================================

Your rig is a two-disc rotor supported on two bearings. Disc 1 and disc 2 each
carry an accelerometer measuring in the vertical direction. All accelerations
are in m/s^2 and all times in seconds. Sampling rate 5000 Hz.

rig_parameters.csv
    The masses and stiffnesses of your rig, and the bearing geometry. These are
    YOUR values -- every group has different ones.

impact_test.csv        columns: t, a1
    Free decay of disc 1 after a single hammer blow, rig at rest. Use this for
    the Chapter 1 tasks: natural frequency and damping ratio.

run_1500_healthy.csv        columns: t, a1, a2
run_2700_unbalance.csv      columns: t, a1, a2
run_1500_misalignment.csv   columns: t, a1, a2
run_2700_bearing_outer_race.csv  columns: t, a1, a2
    Steady running records at a known speed with a KNOWN fault condition. Use
    these to build and calibrate your diagnostic method.

run_2100_unknown_A.csv      columns: t, a1, a2
run_3300_unknown_B.csv      columns: t, a1, a2
    Two records whose condition you must determine. Your classification of
    these two, and the reasoning behind it, is the assessed outcome.

The four possible conditions are: healthy, unbalance, misalignment,
bearing outer-race defect. A condition may occur more than once, or not at all,
among the unknown records.
